Bump to v4
git-svn-id: svn+ssh://svn.code.sf.net/p/mingw-w64/code/trunk@6466 4407c894-4637-0410-b4f5-ada5f102cad1
diff --git a/Makefile.in b/Makefile.in
index 8776f2e..d4c1493 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -15,6 +14,51 @@
@SET_MAKE@
VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -34,10 +78,14 @@
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure AUTHORS COPYING build-aux/config.guess \
- build-aux/config.sub build-aux/install-sh build-aux/missing
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/config.h.in AUTHORS COPYING build-aux/config.guess \
+ build-aux/config.sub build-aux/install-sh build-aux/missing \
+ $(top_srcdir)/build-aux/config.guess \
+ $(top_srcdir)/build-aux/config.sub \
+ $(top_srcdir)/build-aux/install-sh \
+ $(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -48,22 +96,62 @@
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+CSCOPE = cscope
DIST_SUBDIRS = mingw-w64-headers mingw-w64-crt \
mingw-w64-libraries/libmangle mingw-w64-libraries/pseh \
mingw-w64-tools/gendef mingw-w64-tools/genidl
@@ -71,9 +159,12 @@
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -101,10 +192,14 @@
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -197,7 +292,7 @@
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-am--refresh:
+am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
@@ -233,10 +328,8 @@
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
- else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -250,22 +343,25 @@
-rm -f config.h stamp-h1
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
@@ -280,57 +376,12 @@
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -346,12 +397,7 @@
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
@@ -363,15 +409,11 @@
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
@@ -380,9 +422,31 @@
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
@@ -418,13 +482,10 @@
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
@@ -453,36 +514,42 @@
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
@@ -493,8 +560,8 @@
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
@@ -504,17 +571,19 @@
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && ../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
@@ -537,13 +606,21 @@
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
@@ -574,10 +651,15 @@
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@@ -658,23 +740,23 @@
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(am__recursive_targets) all install-am install-strip
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
- distclean distclean-generic distclean-hdr distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
+ distcheck distclean distclean-generic distclean-hdr \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
diff --git a/aclocal.m4 b/aclocal.m4
index 44a9874..5dc2b6a 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,15 +11,16 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -31,10 +32,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
+[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.1], [],
+m4_if([$1], [1.14.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -50,22 +51,22 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
@@ -84,7 +85,7 @@
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
+# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
@@ -110,14 +111,12 @@
# AM_COND_IF -*- Autoconf -*-
-# Copyright (C) 2008 Free Software Foundation, Inc.
+# Copyright (C) 2008-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 1
-
# _AM_COND_IF
# _AM_COND_ELSE
# _AM_COND_ENDIF
@@ -127,18 +126,17 @@
m4_define([_AM_COND_ELSE])
m4_define([_AM_COND_ENDIF])
-
# AM_COND_IF(COND, [IF-TRUE], [IF-FALSE])
# ---------------------------------------
-# If the shell condition matching COND is true, execute IF-TRUE,
-# otherwise execute IF-FALSE. Allow automake to learn about conditional
-# instantiating macros (the AC_CONFIG_FOOS).
+# If the shell condition COND is true, execute IF-TRUE, otherwise execute
+# IF-FALSE. Allow automake to learn about conditional instantiating macros
+# (the AC_CONFIG_FOOS).
AC_DEFUN([AM_COND_IF],
[m4_ifndef([_AM_COND_VALUE_$1],
[m4_fatal([$0: no such condition "$1"])])dnl
_AM_COND_IF([$1])dnl
-if _AM_COND_VALUE_$1; then
- m4_default([$2], [:])
+if test -z "$$1_TRUE"; then :
+ m4_n([$2])[]dnl
m4_ifval([$3],
[_AM_COND_ELSE([$1])dnl
else
@@ -150,22 +148,19 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
-
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
@@ -186,18 +181,21 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 16
-
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -210,7 +208,7 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -239,31 +237,40 @@
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
@@ -274,34 +281,78 @@
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -323,7 +374,7 @@
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -342,16 +393,14 @@
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
-AC_SUBST(install_sh)])
+AC_SUBST([install_sh])])
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
@@ -368,20 +417,17 @@
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
-
# AM_MAINTAINER_MODE([DEFAULT-MODE])
# ----------------------------------
# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well. Anyway, the user
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
[m4_case(m4_default([$1], [disable]),
@@ -389,13 +435,14 @@
[disable], [m4_define([am_maintainer_other], [enable])],
[m4_define([am_maintainer_other], [enable])
m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode's default is 'disable' unless 'enable' is passed
AC_ARG_ENABLE([maintainer-mode],
-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
@@ -403,19 +450,14 @@
]
)
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 6
-
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
@@ -423,11 +465,10 @@
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
-
# AM_MISSING_HAS_RUN
# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
@@ -440,63 +481,35 @@
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
+ AC_MSG_WARN(['missing' script is too old or missing])
fi
])
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
-
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
-# ------------------------------
+# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
+# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
@@ -509,22 +522,16 @@
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
-
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
@@ -535,32 +542,40 @@
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
test "$[2]" = conftest.file
)
then
@@ -570,9 +585,85 @@
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-AC_MSG_RESULT(yes)])
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -580,34 +671,32 @@
# AM_PROG_INSTALL_STRIP
# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
+# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
+# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -615,24 +704,22 @@
AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
+# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
@@ -642,75 +729,114 @@
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- # tar/untar a dummy directory, and stop if the command works
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/configure b/configure
index f821668..d0b9368 100755
--- a/configure
+++ b/configure
@@ -1,13 +1,11 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for mingw-w64 3.0b.
+# Generated by GNU Autoconf 2.69 for mingw-w64 4.0b.
#
# Report bugs to <mingw-w64-public@lists.sourceforge.net>.
#
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
@@ -136,6 +134,31 @@
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
@@ -169,7 +192,8 @@
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -213,21 +237,25 @@
if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
fi
if test x$as_have_required = xno; then :
@@ -330,6 +358,14 @@
} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -451,6 +487,10 @@
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
@@ -485,16 +525,16 @@
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
@@ -506,28 +546,8 @@
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -559,8 +579,8 @@
# Identity of this package.
PACKAGE_NAME='mingw-w64'
PACKAGE_TARNAME='mingw-w64'
-PACKAGE_VERSION='3.0b'
-PACKAGE_STRING='mingw-w64 3.0b'
+PACKAGE_VERSION='4.0b'
+PACKAGE_STRING='mingw-w64 4.0b'
PACKAGE_BUGREPORT='mingw-w64-public@lists.sourceforge.net'
PACKAGE_URL=''
@@ -589,6 +609,10 @@
build_vendor
build_cpu
build
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
am__untar
am__tar
AMTAR
@@ -657,6 +681,7 @@
ac_user_opts='
enable_option_checking
enable_maintainer_mode
+enable_silent_rules
with_headers
with_crt
with_libraries
@@ -1125,8 +1150,6 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1212,7 +1235,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures mingw-w64 3.0b to adapt to many kinds of systems.
+\`configure' configures mingw-w64 4.0b to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1282,7 +1305,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of mingw-w64 3.0b:";;
+ short | recursive ) echo "Configuration of mingw-w64 4.0b:";;
esac
cat <<\_ACEOF
@@ -1290,8 +1313,11 @@
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -1366,10 +1392,10 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-mingw-w64 configure 3.0b
-generated by GNU Autoconf 2.68
+mingw-w64 configure 4.0b
+generated by GNU Autoconf 2.69
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1383,8 +1409,8 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by mingw-w64 $as_me 3.0b, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+It was created by mingw-w64 $as_me 4.0b, which was
+generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -1787,7 +1813,7 @@
MAINT=$MAINTAINER_MODE_TRUE
-am__api_version='1.11'
+am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -1826,7 +1852,7 @@
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -1884,9 +1910,6 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
@@ -1897,32 +1920,40 @@
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-alias in your environment" "$LINENO" 5
- fi
-
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
test "$2" = conftest.file
)
then
@@ -1934,6 +1965,16 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
@@ -1956,12 +1997,12 @@
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh}" != xset; then
@@ -1973,10 +2014,10 @@
esac
fi
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -1995,7 +2036,7 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2035,7 +2076,7 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2086,7 +2127,7 @@
test -z "$as_dir" && as_dir=.
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir (GNU coreutils) '* | \
'mkdir (coreutils) '* | \
@@ -2115,12 +2156,6 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2139,7 +2174,7 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2203,6 +2238,45 @@
fi
rmdir .tst 2>/dev/null
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
@@ -2225,7 +2299,7 @@
# Define the identity of the package.
PACKAGE='mingw-w64'
- VERSION='3.0b'
+ VERSION='4.0b'
cat >>confdefs.h <<_ACEOF
@@ -2253,19 +2327,71 @@
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
-# Always define AMTAR for backward compatibility.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
@@ -2461,11 +2587,11 @@
LIBRARIES_PSEH_FALSE=
fi
-if test "x$with_libraries_mangle" = xyes; then
+if test -z "$LIBRARIES_MANGLE_TRUE"; then :
subdirs="$subdirs mingw-w64-libraries/libmangle"
fi
-if test "x$with_libraries_pseh" = xyes; then
+if test -z "$LIBRARIES_PSEH_TRUE"; then :
subdirs="$subdirs mingw-w64-libraries/pseh"
fi
@@ -2521,11 +2647,11 @@
TOOLS_GENIDL_FALSE=
fi
-if test "x$with_tools_gendef" = xyes; then
+if test -z "$TOOLS_GENDEF_TRUE"; then :
subdirs="$subdirs mingw-w64-tools/gendef"
fi
-if test "x$with_tools_genidl" = xyes; then
+if test -z "$TOOLS_GENIDL_TRUE"; then :
subdirs="$subdirs mingw-w64-tools/genidl"
fi
@@ -2647,6 +2773,14 @@
as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
if test -z "${HEADER_TRUE}" && test -z "${HEADER_FALSE}"; then
as_fn_error $? "conditional \"HEADER\" was never defined.
@@ -2970,16 +3104,16 @@
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
@@ -3039,28 +3173,16 @@
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -3081,8 +3203,8 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by mingw-w64 $as_me 3.0b, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+This file was extended by mingw-w64 $as_me 4.0b, which was
+generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -3143,11 +3265,11 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-mingw-w64 config.status 3.0b
-configured by $0, generated by GNU Autoconf 2.68,
+mingw-w64 config.status 4.0b
+configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -3238,7 +3360,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
diff --git a/configure.ac b/configure.ac
index 562f8ed..4bb3926 100644
--- a/configure.ac
+++ b/configure.ac
@@ -2,7 +2,7 @@
# Process this file with autoconf to produce a configure script.
AC_PREREQ([2.65])
-AC_INIT([mingw-w64],[3.0b],[mingw-w64-public@lists.sourceforge.net])
+AC_INIT([mingw-w64],[4.0b],[mingw-w64-public@lists.sourceforge.net])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_SRCDIR([AUTHORS])
AC_CONFIG_HEADERS([config.h])
diff --git a/mingw-w64-crt/configure b/mingw-w64-crt/configure
index 8a1e72f..ac2508c 100755
--- a/mingw-w64-crt/configure
+++ b/mingw-w64-crt/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for mingw-w64-runtime 3.0b.
+# Generated by GNU Autoconf 2.69 for mingw-w64-runtime 4.0b.
#
# Report bugs to <mingw-w64-public@lists.sourceforge.net>.
#
@@ -580,8 +580,8 @@
# Identity of this package.
PACKAGE_NAME='mingw-w64-runtime'
PACKAGE_TARNAME='mingw-w64-runtime'
-PACKAGE_VERSION='3.0b'
-PACKAGE_STRING='mingw-w64-runtime 3.0b'
+PACKAGE_VERSION='4.0b'
+PACKAGE_STRING='mingw-w64-runtime 4.0b'
PACKAGE_BUGREPORT='mingw-w64-public@lists.sourceforge.net'
PACKAGE_URL=''
@@ -1340,7 +1340,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures mingw-w64-runtime 3.0b to adapt to many kinds of systems.
+\`configure' configures mingw-w64-runtime 4.0b to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1411,7 +1411,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of mingw-w64-runtime 3.0b:";;
+ short | recursive ) echo "Configuration of mingw-w64-runtime 4.0b:";;
esac
cat <<\_ACEOF
@@ -1531,7 +1531,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-mingw-w64-runtime configure 3.0b
+mingw-w64-runtime configure 4.0b
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1825,7 +1825,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by mingw-w64-runtime $as_me 3.0b, which was
+It was created by mingw-w64-runtime $as_me 4.0b, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -2692,7 +2692,7 @@
# Define the identity of the package.
PACKAGE='mingw-w64-runtime'
- VERSION='3.0b'
+ VERSION='4.0b'
cat >>confdefs.h <<_ACEOF
@@ -6578,7 +6578,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by mingw-w64-runtime $as_me 3.0b, which was
+This file was extended by mingw-w64-runtime $as_me 4.0b, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -6644,7 +6644,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-mingw-w64-runtime config.status 3.0b
+mingw-w64-runtime config.status 4.0b
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
diff --git a/mingw-w64-crt/configure.ac b/mingw-w64-crt/configure.ac
index 1de7e22..cf6e942 100644
--- a/mingw-w64-crt/configure.ac
+++ b/mingw-w64-crt/configure.ac
@@ -3,7 +3,7 @@
# Use AM_MAINTANER_MODE somewhere in this file once reconfigurations settle down.
AC_PREREQ([2.69])
-AC_INIT([mingw-w64-runtime],[3.0b],[mingw-w64-public@lists.sourceforge.net])
+AC_INIT([mingw-w64-runtime],[4.0b],[mingw-w64-public@lists.sourceforge.net])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_SRCDIR([ChangeLog])
AC_CONFIG_HEADER([config.h])
diff --git a/mingw-w64-headers/configure b/mingw-w64-headers/configure
index 740a850..027b20d 100755
--- a/mingw-w64-headers/configure
+++ b/mingw-w64-headers/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for mingw-w64-headers 3.0b.
+# Generated by GNU Autoconf 2.69 for mingw-w64-headers 4.0b.
#
# Report bugs to <mingw-w64-public@lists.sourceforge.net>.
#
@@ -580,8 +580,8 @@
# Identity of this package.
PACKAGE_NAME='mingw-w64-headers'
PACKAGE_TARNAME='mingw-w64-headers'
-PACKAGE_VERSION='3.0b'
-PACKAGE_STRING='mingw-w64-headers 3.0b'
+PACKAGE_VERSION='4.0b'
+PACKAGE_STRING='mingw-w64-headers 4.0b'
PACKAGE_BUGREPORT='mingw-w64-public@lists.sourceforge.net'
PACKAGE_URL=''
@@ -620,6 +620,10 @@
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
am__untar
am__tar
AMTAR
@@ -684,6 +688,7 @@
ac_subst_files=''
ac_user_opts='
enable_option_checking
+enable_silent_rules
enable_maintainer_mode
with_widl
enable_w32api
@@ -1235,7 +1240,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures mingw-w64-headers 3.0b to adapt to many kinds of systems.
+\`configure' configures mingw-w64-headers 4.0b to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1306,7 +1311,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of mingw-w64-headers 3.0b:";;
+ short | recursive ) echo "Configuration of mingw-w64-headers 4.0b:";;
esac
cat <<\_ACEOF
@@ -1314,6 +1319,8 @@
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
@@ -1395,7 +1402,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-mingw-w64-headers configure 3.0b
+mingw-w64-headers configure 4.0b
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1412,7 +1419,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by mingw-w64-headers $as_me 3.0b, which was
+It was created by mingw-w64-headers $as_me 4.0b, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -1793,7 +1800,7 @@
ac_config_headers="$ac_config_headers config.h"
-am__api_version='1.12'
+am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -1977,8 +1984,8 @@
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
@@ -2218,6 +2225,45 @@
fi
rmdir .tst 2>/dev/null
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
@@ -2240,7 +2286,7 @@
# Define the identity of the package.
PACKAGE='mingw-w64-headers'
- VERSION='3.0b'
+ VERSION='4.0b'
cat >>confdefs.h <<_ACEOF
@@ -2280,6 +2326,10 @@
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
@@ -2287,6 +2337,48 @@
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
@@ -3249,7 +3341,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by mingw-w64-headers $as_me 3.0b, which was
+This file was extended by mingw-w64-headers $as_me 4.0b, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3311,7 +3403,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-mingw-w64-headers config.status 3.0b
+mingw-w64-headers config.status 4.0b
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
diff --git a/mingw-w64-headers/configure.ac b/mingw-w64-headers/configure.ac
index 72d26d8..16e523f 100644
--- a/mingw-w64-headers/configure.ac
+++ b/mingw-w64-headers/configure.ac
@@ -2,7 +2,7 @@
# Process this file with autoconf to produce a configure script.
AC_PREREQ([2.69])
-AC_INIT([mingw-w64-headers],[3.0b],[mingw-w64-public@lists.sourceforge.net])
+AC_INIT([mingw-w64-headers],[4.0b],[mingw-w64-public@lists.sourceforge.net])
AC_CONFIG_SRCDIR([crt/_mingw.h.in])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_HEADERS([config.h])
diff --git a/mingw-w64-libraries/libmangle/Makefile.in b/mingw-w64-libraries/libmangle/Makefile.in
index 5321dc6..a666f09 100644
--- a/mingw-w64-libraries/libmangle/Makefile.in
+++ b/mingw-w64-libraries/libmangle/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,23 +16,51 @@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -53,9 +81,11 @@
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in $(top_srcdir)/build-aux/depcomp \
- $(include_HEADERS) COPYING ChangeLog build-aux/config.guess \
- build-aux/config.sub build-aux/depcomp build-aux/install-sh \
- build-aux/missing $(top_srcdir)/build-aux/install-sh \
+ $(include_HEADERS) COPYING ChangeLog build-aux/compile \
+ build-aux/config.guess build-aux/config.sub build-aux/depcomp \
+ build-aux/install-sh build-aux/missing \
+ $(top_srcdir)/build-aux/compile \
+ $(top_srcdir)/build-aux/install-sh \
$(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -320,8 +350,8 @@
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -373,6 +403,7 @@
src/m_ms.$(OBJEXT): src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
src/m_token.$(OBJEXT): src/$(am__dirstamp) \
src/$(DEPDIR)/$(am__dirstamp)
+
libmangle.a: $(libmangle_a_OBJECTS) $(libmangle_a_DEPENDENCIES) $(EXTRA_libmangle_a_DEPENDENCIES)
$(AM_V_at)-rm -f libmangle.a
$(AM_V_AR)$(libmangle_a_AR) libmangle.a $(libmangle_a_OBJECTS) $(libmangle_a_LIBADD)
@@ -540,10 +571,16 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
@@ -585,9 +622,10 @@
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
diff --git a/mingw-w64-libraries/libmangle/aclocal.m4 b/mingw-w64-libraries/libmangle/aclocal.m4
index 18a4d66..0d3fc74 100644
--- a/mingw-w64-libraries/libmangle/aclocal.m4
+++ b/mingw-w64-libraries/libmangle/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
+[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.13.1], [],
+m4_if([$1], [1.14.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -51,7 +51,7 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.1])dnl
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
@@ -373,7 +373,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
@@ -418,6 +418,12 @@
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -526,7 +532,48 @@
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -534,7 +581,6 @@
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -752,6 +798,70 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
@@ -961,76 +1071,114 @@
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- # tar/untar a dummy directory, and stop if the command works
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/mingw-w64-libraries/libmangle/build-aux/compile b/mingw-w64-libraries/libmangle/build-aux/compile
new file mode 100755
index 0000000..531136b
--- /dev/null
+++ b/mingw-w64-libraries/libmangle/build-aux/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/mingw-w64-libraries/libmangle/configure b/mingw-w64-libraries/libmangle/configure
index f9daf84..fd5b6b3 100755
--- a/mingw-w64-libraries/libmangle/configure
+++ b/mingw-w64-libraries/libmangle/configure
@@ -2292,7 +2292,7 @@
ac_config_headers="$ac_config_headers config.h"
-am__api_version='1.13'
+am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -2818,6 +2818,10 @@
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
@@ -2825,6 +2829,48 @@
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
@@ -3637,6 +3683,65 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
@@ -5926,7 +6031,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
diff --git a/mingw-w64-libraries/pseh/Makefile.in b/mingw-w64-libraries/pseh/Makefile.in
index 4aed8e1..66427d4 100644
--- a/mingw-w64-libraries/pseh/Makefile.in
+++ b/mingw-w64-libraries/pseh/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,23 +16,51 @@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -56,8 +84,9 @@
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in $(top_srcdir)/build-aux/depcomp \
$(framebased_HEADERS) $(pseh_HEADERS) COPYING INSTALL \
- build-aux/config.guess build-aux/config.sub build-aux/depcomp \
- build-aux/install-sh build-aux/missing \
+ build-aux/compile build-aux/config.guess build-aux/config.sub \
+ build-aux/depcomp build-aux/install-sh build-aux/missing \
+ $(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
@@ -357,8 +386,8 @@
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -421,6 +450,7 @@
src/i386/$(DEPDIR)/$(am__dirstamp)
src/i386/framebased.$(OBJEXT): src/i386/$(am__dirstamp) \
src/i386/$(DEPDIR)/$(am__dirstamp)
+
libpseh.a: $(libpseh_a_OBJECTS) $(libpseh_a_DEPENDENCIES) $(EXTRA_libpseh_a_DEPENDENCIES)
$(AM_V_at)-rm -f libpseh.a
$(AM_V_AR)$(libpseh_a_AR) libpseh.a $(libpseh_a_OBJECTS) $(libpseh_a_LIBADD)
@@ -628,10 +658,16 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
@@ -673,9 +709,10 @@
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
diff --git a/mingw-w64-libraries/pseh/aclocal.m4 b/mingw-w64-libraries/pseh/aclocal.m4
index 899181d..25b81a9 100644
--- a/mingw-w64-libraries/pseh/aclocal.m4
+++ b/mingw-w64-libraries/pseh/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
+[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.13.1], [],
+m4_if([$1], [1.14.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -51,7 +51,7 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.1])dnl
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
@@ -393,7 +393,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
@@ -438,6 +438,12 @@
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -546,7 +552,48 @@
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -554,7 +601,6 @@
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -736,6 +782,70 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
@@ -945,76 +1055,114 @@
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- # tar/untar a dummy directory, and stop if the command works
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/mingw-w64-libraries/pseh/build-aux/compile b/mingw-w64-libraries/pseh/build-aux/compile
new file mode 100755
index 0000000..531136b
--- /dev/null
+++ b/mingw-w64-libraries/pseh/build-aux/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/mingw-w64-libraries/pseh/configure b/mingw-w64-libraries/pseh/configure
index 604d3e2..de1e6c9 100755
--- a/mingw-w64-libraries/pseh/configure
+++ b/mingw-w64-libraries/pseh/configure
@@ -2082,7 +2082,7 @@
ac_config_headers="$ac_config_headers config.h"
-am__api_version='1.13'
+am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -2608,6 +2608,10 @@
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
@@ -2615,6 +2619,48 @@
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
@@ -3485,6 +3531,65 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
@@ -5702,7 +5807,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
diff --git a/mingw-w64-tools/gendef/Makefile.in b/mingw-w64-tools/gendef/Makefile.in
index 8c30957..6fd9ad0 100644
--- a/mingw-w64-tools/gendef/Makefile.in
+++ b/mingw-w64-tools/gendef/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -15,23 +15,51 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -55,8 +83,9 @@
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in $(top_srcdir)/build-aux/depcomp COPYING \
- ChangeLog build-aux/config.guess build-aux/config.sub \
- build-aux/depcomp build-aux/install-sh build-aux/missing \
+ ChangeLog build-aux/compile build-aux/config.guess \
+ build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+ build-aux/missing $(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
@@ -308,8 +337,8 @@
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -377,6 +406,7 @@
src/$(DEPDIR)/$(am__dirstamp)
src/gendef-fsredir.$(OBJEXT): src/$(am__dirstamp) \
src/$(DEPDIR)/$(am__dirstamp)
+
gendef$(EXEEXT): $(gendef_OBJECTS) $(gendef_DEPENDENCIES) $(EXTRA_gendef_DEPENDENCIES)
@rm -f gendef$(EXEEXT)
$(AM_V_CCLD)$(gendef_LINK) $(gendef_OBJECTS) $(gendef_LDADD) $(LIBS)
@@ -580,10 +610,16 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
@@ -625,9 +661,10 @@
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
diff --git a/mingw-w64-tools/gendef/aclocal.m4 b/mingw-w64-tools/gendef/aclocal.m4
index 18a4d66..0d3fc74 100644
--- a/mingw-w64-tools/gendef/aclocal.m4
+++ b/mingw-w64-tools/gendef/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
+[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.13.1], [],
+m4_if([$1], [1.14.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -51,7 +51,7 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.1])dnl
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
@@ -373,7 +373,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
@@ -418,6 +418,12 @@
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -526,7 +532,48 @@
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -534,7 +581,6 @@
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -752,6 +798,70 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
@@ -961,76 +1071,114 @@
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- # tar/untar a dummy directory, and stop if the command works
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/mingw-w64-tools/gendef/build-aux/compile b/mingw-w64-tools/gendef/build-aux/compile
new file mode 100755
index 0000000..531136b
--- /dev/null
+++ b/mingw-w64-tools/gendef/build-aux/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/mingw-w64-tools/gendef/configure b/mingw-w64-tools/gendef/configure
index 02e718a..07c08ac 100755
--- a/mingw-w64-tools/gendef/configure
+++ b/mingw-w64-tools/gendef/configure
@@ -2387,7 +2387,7 @@
ac_config_headers="$ac_config_headers config.h"
-am__api_version='1.13'
+am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -2913,6 +2913,10 @@
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
@@ -2920,6 +2924,48 @@
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
@@ -3804,6 +3850,65 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
@@ -5983,7 +6088,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
diff --git a/mingw-w64-tools/genidl/Makefile.in b/mingw-w64-tools/genidl/Makefile.in
index 5facb8c..84b5bbd 100644
--- a/mingw-w64-tools/genidl/Makefile.in
+++ b/mingw-w64-tools/genidl/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -15,23 +15,51 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -55,8 +83,9 @@
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in $(top_srcdir)/build-aux/depcomp COPYING \
- ChangeLog build-aux/config.guess build-aux/config.sub \
- build-aux/depcomp build-aux/install-sh build-aux/missing \
+ ChangeLog build-aux/compile build-aux/config.guess \
+ build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+ build-aux/missing $(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
@@ -309,8 +338,8 @@
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -384,6 +413,7 @@
src/$(DEPDIR)/$(am__dirstamp)
src/genidl-genidl.$(OBJEXT): src/$(am__dirstamp) \
src/$(DEPDIR)/$(am__dirstamp)
+
genidl$(EXEEXT): $(genidl_OBJECTS) $(genidl_DEPENDENCIES) $(EXTRA_genidl_DEPENDENCIES)
@rm -f genidl$(EXEEXT)
$(AM_V_CCLD)$(genidl_LINK) $(genidl_OBJECTS) $(genidl_LDADD) $(LIBS)
@@ -632,10 +662,16 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
@@ -677,9 +713,10 @@
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
diff --git a/mingw-w64-tools/genidl/aclocal.m4 b/mingw-w64-tools/genidl/aclocal.m4
index 18a4d66..0d3fc74 100644
--- a/mingw-w64-tools/genidl/aclocal.m4
+++ b/mingw-w64-tools/genidl/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
+[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.13.1], [],
+m4_if([$1], [1.14.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -51,7 +51,7 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.1])dnl
+[AM_AUTOMAKE_VERSION([1.14.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
@@ -373,7 +373,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
@@ -418,6 +418,12 @@
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -526,7 +532,48 @@
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -534,7 +581,6 @@
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
@@ -752,6 +798,70 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996-2013 Free Software Foundation, Inc.
@@ -961,76 +1071,114 @@
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- # tar/untar a dummy directory, and stop if the command works
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/mingw-w64-tools/genidl/configure b/mingw-w64-tools/genidl/configure
index 6ab7299..ea1220c 100755
--- a/mingw-w64-tools/genidl/configure
+++ b/mingw-w64-tools/genidl/configure
@@ -2377,7 +2377,7 @@
ac_config_headers="$ac_config_headers config.h"
-am__api_version='1.13'
+am__api_version='1.14'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -2903,6 +2903,10 @@
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
@@ -2910,6 +2914,48 @@
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
@@ -3794,6 +3840,65 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
@@ -6017,7 +6122,7 @@
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
